Ultrasonic Particle Generator

Sonaer's ultrasonic particle generator converts low viscosity liquids into fine like particles. Sonaer's ultrasonic particle generator uses our minature 2.4 MHz model 241T, Fluoropolymer coated ultrasonic nebulizer. The unit is fully microprocessor based, allowing the user to program operating parameters into the unit, handling a wide variety of applications for accurate particle generation. On the front panel is a LCD dispalay that the user can change the rate at which particles are being generated form 0 to 100% of the full output capability, in 5% increments. Built into the device is a variable 0 - 2 cfm air flow for moving particles out of the vessel where particles are being made, for special processes, like coating small parts. This air flow source and all other connections are attached with quick disconnect 304 stainless steel fittings and Fluoropolymer O-rings. This makes for easy removal of components for cleaning or adapting the device with simple connections, such as external gas supply or vacuums. A 304 stainless steel TEE ( can be ordered with Fluoropolymer coating) allows particles to be made in the stem and a small air flow/gas/vacuum is used to move the particles from the unit. Execellent for stent coatings. Make the smallest particle size with a tight particle distribution. All connections are a standard 1.5 inch sanitary tube fittings which accept reducers, elbows and accessories below. The unit comes with an external Fluoropolymer optical sensor for keeping the liquid level to the correct height and preventing damage to the nebulizing element, should the unit run dry. A container is provided for holding the liquid to be atomized. This container can be changed with other liquid holding cells. The microprocessor handles all the functions of the 241PG, including timed operation where particles can be made in preprogrammed amounts and an external five volt enable/disable feature.

The 241PGT is the latest addition to the Sonaer product line and includes PTFE Fluoropolymer vessel and container, PTFE Fluoropolymer seals, PTFE Fluoropolymer valve and tubing, PFA Fluoropolymer Sensor, PFA Fluoropolymer 1.5" sanitary TEE with stainless steel quick disconnect clamps. The unit will accept all 1.5" saniatry fittings, both stainless steel and Fluoropolymer. Sonaer’s 241PGT operates the same as the 241PG, except with the addition of extreme chemical inertness most suitable for aggressive chemicals, low in ph, that the 241PG coating cannot handle. Particle output is less for this unit as compaired to the 241PG due to the Fluoropolymer components.

LINKS

Click this link for papers and articles using Sonaer's ultrasonic products Atomizer and Nebulizer Technical Information

241PG Specifications
241PGT Specifications
Particle Size Introduction
Particle Distribution Data
Particle Distribution with Laminar Flow Vessel
How to nebulize micro liter volumes with the 241 series nebulizer
CVD Using Particle Generators / Nebulizers

241PG	241PG Optical Sensor	241PG	241PG Front Pannel
241PG KF40 Vacuum Fitting	241PG Vacuum Fitting	241PG GAS Fitting	241PG Laminar Flow Vessel

241PGT PFA TEE P/N T241PGT	241PGT PTFE Vacuum P/N VF241PGT	241PGT PTFE Gas P/N GF241PGT	241PGT PTFE Laminar Flow Vessel P/N LF241PGT
241PG 304 Stainless Steel TEE 1.5" P/N T15241PG 3" P/N T3241PG 4" P/N T4241PG 6" P/N T6241PG	241PG KF40 Vacuum Fitting P/N VF241PG DWG	241PG Gas Fitting P/N GF241PG Can be used on output	241PG Laminar Flow Vessel P/N LF241PG DWG
241PG 304 SS 45 Elbow 1.5" P/N E15241PG45 3" P/N E3241PG45 4" P/N E4241PG45 6" P/N E6241PG45	241PG 304 SS 90 Elbow 1.5" P/N E15241PG90 3" P/N E3241PG90 4" P/N E4241PG90 6" P/N E6241PG90	241PG 304 SSCouplings 1"-1.5" P/N C115241PG 1.5"-2" P/N C152241PG 1.5"-3" P/N C153241PG 3"-4" P/N C34241PG 3"-6" P/N C36241PG	241PG Strsight Tube 6", 12", 18" Size P/N S241PG(size)6,12,18
241PGT PFA Fluoropolymer 90 Deg Elbow P/N E241PGT90	241PG 304 SS Wyes 1.5" P/N Y15241PG 3" P/N Y3241PG 4" P/N Y4241PG 6" P/N Y6241PG
241PG Fluoropolymer Coated Container P/N C241PG	241PG Fluoropolymer Coated Cover P/N TC2421PG	241PG Fluoropolymer Coated Vessel P/N OV241PG	241PG Fluoropolymer Sensor P/N OS241PG/T
241PG Mounting Plate P/N MP241PG	241PG Fluoropolymer Valve P/N TV241PG/T	241PG 304 Stainless Steel Clamp 1.5" P/N CL15241PG/T 3" P/N CL3241PG/T 4" P/N CL4241PG/T 6" P/N CL6241PG/T	2.4MHz Crystal Gold P/N 24Au
241PG Fan P/N F241PG/T w/o ss plate P/N F241PG/TNP	241PG Fluoropolymer Tubes P/N TS241PG/T	241PG Fluoropolymer Tubing P/N TT241PG/T	241PG Fluoropolymer O-Ring 1.5" P/N OR15241PG/T 3" P/N OR3241PG/T 4" P/N OR4241PG/T 6" P/N OR6241PG/T
241TM Module PTFE Fluoropolymer Seals P/N 241TM	For Compnents not shown, please inquire. We offer couplings, straight tubes etc. in PTFE, PFA Fluoropolymer, 304 and 316 SS.


				Stent Coating
				Laminar Flow